PIAP IBIS®
PIAP IBIS® is a robot designed for pyrotechnic operations and reconnaissance. Upon installation of additional devices, it can be used, among others, for disposal of dangerous objects, chemical detection and rescue operations.
Six-wheeled chassis with independent drive of each wheel allows to operate in challenging and varied terrain. PIAP IBIS® is a fast robot (10 km/h). Special design of mobile base suspension ensures optimum wheel contact with the ground. Manipulator with extendable arm ensures a large reach (over three meters) and a high range of motion in each plane.
PIAP IBIS Leaflet 0.33 MB
Technical data
( all weights and dimensions are approximate and details are subject to change without notification )
| Dimensions | 135 x 88 x 125 cm (LxWxH) |
| Total mass | 320 kg |
| Speed | up to 10 km/h |
| Manipulator’s maximum lift | up to 50 kg |
| Manipulator’s maximum range | 3,3 m |
| No. of degrees of freedom (manipulator) | 6 + clamp of gripper |
| No. of robot’s cameras | 4 |
| Maximum battery operation time | approx. 4 hours (mission dependent) |
| Drive system | wheels |
Accessories
- Equipment:
- camera with IR illuminators for day and night vision – weight [kg]: 2.1,
- lasers (2 pcs.),
- safety switch,
- weight:[kg]: 2,1
- dimensions [cm]: 12-20.5(W) x 14(H) x 11(L)
enables mounting a Benelli M4 Super 90 rifle- equipped with laser sight, accessories connector and safety switch
- materials: steel + aluminium
- weight [ kg]: 3
- dimensions [cm]: 68(L) x 24(H) x 10.5(W)
PIAP IBIS robot works with an X-ray device with dispensable screens- adapter for X-ray device is composed of:
- adapter to mount the device in the gripper
- telescopic boom
- screen holder
- radiation generator holder
- compatible with AP2C sensor
- enables steering the robot without radio communication
- essential for connecting the repeater
- the passive fibre optic cable winder set consists of:
- body
- crank
- short fibre optic cable
- long fibre optic cable (on the reel)
- RIS rail holders
- weight [kg]: 3.1
- dimensions [cm]: 21(L) x 25(W) x 28(H)
- technical specification of the fibre optic:
- minimum bending radius: 25mm
- maximum tensile force: 300N (30.5 kg)
- Available length: [m]: 150, 300
enables steering the robot without radio communication- cable length: up to 300m
- weight [kg]: 6.15
- dimensions [cm]: 28(L) x 23(W) x 24(H)
for remote detonation of the explosives
enables remote location of antennae
PIAP IBIS works with a negotiation kit which consists of:
two microphones and one loudspeaker installed on the mobile base and a microphone connected to the control panel- Negotiation kit requires fibre optic remote control
Digital recorder for recording image obtained from the robot
small steering panel- internal battery (charger 230v)
- weight [kg]: 0.43
- dimensions [cm]: 16.5(L) x 11(W) x 3.5 [+3.5 joysticks] (H)
- range: [m]: 10 (in the open area)
- operating time: estimated at min. 1h
additional battery for the control panel
- additional battery for the mobile base
- Enables continuous work of the control panel, while connecting to power source
Doubles the operating capacity of the robot- Requires the installation of fibre optic cable or passive fibre optic winder.
the device works automatically and requires no other action from the operator- the breaker consists of a the bolt terminated with sintered carbide and an inner hammer system. The housing allows the device to be held with gripper jaws.
Environmental swab- Ground sampler
- Forensic samplers set
- SPME adsorber
- R – Sensor (integrated EKO-C)
Knocking windows, knocking holes in surfaces and lock fittings or other small parts
(the principle of „pile driver”)- Piercing objects, e.g. tires
- Breaking hinges
- Cutting metal rods, cables, wires, chains, tubes
- Cutting off elements
- Initiating non-electric detonators such as STS, NDS, NONEL
- Basic operating tips:
- Cutter for cable, wire and rod;
- Punches for windows and other components;
- Triggers to initiate explosion with non-electric detonation systems;
- Cutters (knives and blades)- Possibility of designing tips for specific needs of the user
for detection of errors and faults in the robot- for changing settings and configuration of the robot
- accessories and SVGA connector
enables vision at night- fixed near the gripper camera
- power supply from the robot
- remote turn off function located near the camera view switch
- dimensions [cm]: 20(L) x 9 (H)
- line with a hook to tow a car
We declare willingness to modify the robot and optional equipment according to the user’s needs.
Gallery
Contact
Awards
